Performance Parts
The performance parts listed below will be sent overnight free of charge via New Zealand Couriers unless stated otherwise. Freight charges may apply for overseas orders - enquire for details If the performance parts you require are not listed below please click here to fill out a parts finder form or call 0800 COCKRAM and ask for parts
|
||||||||||||
Gaskets |
||||||||||||
 |
Genuine Steel Head Gasket - SR20VESteel head gasket to fit SR20VE & SR20VET |
|||||||||||
| $125.00 |  |
|||||||||||
|
Steel Head Gasket - SR20DETPermaseal mutli-layer steel head gasket to fit all SR20DET |
|||||||||||
| $235.00 | |
|||||||||||
 |
Steel Head Gasket - RB25DETPermaseal mutli-layer steel head gasket to fit RB25DET. |
|||||||||||
| $285.00 |  |
|||||||||||
|
Steel Head Gasket - RB26DETTPermaseal mutli-layer steel head gasket to fit RB26DETT. Also suitable for RB30 twin cam conversions. |
|||||||||||
| $260.00 | |
|||||||||||
 |
Steel Head Gasket - Mitsubishi 4G63T EarlyPermaseal mutli-layer steel head gasket to fit 4G63T engine in Evo 1/2/3 and VR4 Galant * Allow 2-3 days delivery |
|||||||||||
| $165.00 | |
|||||||||||
|
Steel Head Gasket - Mitsubishi 4G63T LatePermaseal mutli-layer steel head gasket to fit 4G63T engine in Evo 4/5/6/7/8 * Allow 2-3 days delivery |
|||||||||||
| $199.00 | |
|||||||||||
 |
Steel Head Gaskets - Subaru EJ20TPermaseal mutli-layer steel head gaskets to fit EJ20T engine * Allow 2-3 days delivery |
|||||||||||
| $239.00 | |
|||||||||||
 |
Steel Head Gasket - Toyota 2JZGE / GTEPermaseal mutli-layer steel head gasket to fit 2JZGE / 2JZGTE engines * Allow 2-3 days delivery |
|||||||||||
| $299.00 | |
|||||||||||
 |
Genuine Steel Exhaust Manifold Gasket - SR20DE/DETSteel exhaust manifold gasket to fit SR20DE & SR20DET |
|||||||||||
| $99.00 | |
|||||||||||
 |
Permaseal Steel Exhaust Manifold Gaskets - RB SeriesSteel exhaust manifold gasket set to fit RB20DE/DET, RB25DE/DET and RB26DETT |
|||||||||||
| $99.00 | |
|||||||||||
|
Genuine Steel Exhaust Manifold Gasket - SR20VESteel exhaust manifold gasket to fit SR20VE & SR20VET |
|||||||||||
| $75.00 | |
|||||||||||
| Back To Top | ||||||||||||
Manifolds
|
||||||||||||
 |
CNP Front Facing Plenum (RB25DET)Polished front facing inlet plenum to fit RB25DET (similar to Greddy). Includes all nuts, bolts, washers etc and vacuum hoses. This is designed as a bolt on replacement with the exception of the throttle body - if you're using the 80mm throttle body (below) it will bolt straight up, if you're using the factory throttle body you'll need an adapter plate. These are a high quality product and are well finished inside and out. |
|||||||||||
| For 80mm Throttle Body: | $499.00 | |
||||||||||
For factory throttle body (includes adapter): |
$625.00 | |
||||||||||
 |
CNP 80MM Throttle Body (RB25DET)80mm Throttle body. This is a straight bolt on fit to the forward facing plenum (see above). Can also be used on the factory intake plenum but will require an adapter plate (see below) |
|||||||||||
| For Forward Facing Plenum: | $299.00 | |
||||||||||
For factory intake plenum (includes adapter): |
$420.00 | |
||||||||||
 |
CNP Turbo Exhaust Manifold (High Mount)High mount stainless turbo exhaust manifold to suit RB20DET & RB25DET. Has external wastegate flange. Includes new studs and gaskets |
|||||||||||
| $475.00 | |
|||||||||||
 |
CNP Turbo Dump PipeTurbo dump pipe to suit RB25DET |
|||||||||||
| $139.00 |  |
|||||||||||
| Back To Top | ||||||||||||
Turbochargers |
||||||||||||
| NEW SHIPMENT JUST ARRIVED! | ||||||||||||
 |
T04 TurbochargerComes with a 12 month comprehensive warranty |
|||||||||||
| $649.00 | |
|||||||||||
 |
T04 Turbocharger KitT04 turbo complete with braided lines, gaskets, bolts, clips and all other fittings required. Comes with a 12 month comprehensive warranty |
|||||||||||
| $849.00 | |
|||||||||||
 |
T3/T4 TurbochargerComes with a 12 month comprehensive warranty These are officially rated to 350hp at 18psi but we have seen them reliably operate at even higher than that. |
|||||||||||
| $399.00 | |
|||||||||||
|
T3/T4 Turbocharger KitT3/T4 turbo complete with braided lines, gaskets, bolts, clips and all other fittings required. Comes with a 12 month comprehensive warranty |
|||||||||||
| $599.00 | |
|||||||||||
 |
T3/T4 Turbocharger With Internal WastegateComes with a 12 month comprehensive warranty These are officially rated to 350hp at 18psi but we have seen them reliably operate at even higher than that. |
|||||||||||
| $549.00 | |
|||||||||||
| Back To Top | ||||||||||||
Wastegates |
||||||||||||
 |
38mm External Wastegate |
|||||||||||
| $199.00 | |
|||||||||||
| Back To Top | ||||||||||||
Intercoolers |
||||||||||||
 |
Intercooler Kit - SR20DETFront mount high-flow intercooler kit to suit SR20DET. Includes flowed alloy polished pipes, hose joiners, brackets and bolts etc S14, S15 Silvia/200SX |
|||||||||||
| $499.00 | |
|||||||||||
|
Intercooler Kit - SR20DETFront mount high-flow intercooler kit to suit SR20DET. Includes flowed alloy polished pipes, hose joiners, brackets and bolts etc N14 GTI-R Pulsar |
|||||||||||
| $499.00 | |
|||||||||||
|
Intercooler Kit -RB20/25DETFront mount high-flow intercooler kit to suit RB20DET, RB25DET . Includes flowed alloy polished pipes, hose joiners, brackets and bolts etc R32/R33/R34 |
|||||||||||
| $499.00 | |
|||||||||||
| Back To Top | ||||||||||||
Fuel Pressure Regulators |
||||||||||||
 |
Rising Rate Fuel Pressure RegulatorAeromotive style - 0-60psi with oil filled gauge. Comes with braided lines and all fittings required. |
|||||||||||
| $199.00 | |
|||||||||||
Exedy Performance Clutches |
||||||||||||
Quick Search: |
|
|||||||||||
|
||||||||||||
 |
Exedy Sports Tuff Heavy Duty Clutch KitsThe Sports Tuff heavy duty organic clutch kits are well suited for use in lightly modified vehicles or in amateur motor sports activities. A high performance clutch cover with increased clamp load which will transmit an increase in engine torque is included in these kits with an organic clutch disc creating a performance clutch kit with smooth take off and good drivability |
|||||||||||
Nissan |
S13 Silvia / 180SX CA18DET | $599.00 | |
|||||||||
| S13/S14 Silvia SR20DET | $499.00 | |
||||||||||
S15 Silvia SR20DET |
$599.00 | |
||||||||||
| * we can supply the S15 kit with a solid flywheel to replace the factory dual mass flywheel - enquire for details | ||||||||||||
| R32 Skyline RB20DET | $499.00 | |
||||||||||
| R33 Skyline RB25DET | $499.00 | |
||||||||||
| R32 Skyline GT-R (early push type) | $699.00 | |
||||||||||
| R32 Skyline GT-R (late pull type) | $995.00 | |
||||||||||
| R33/R34 Skyline GT-R | $1295.00 | |
||||||||||
| RB30E | $550.00 | |
||||||||||
| P10/P11 Primera SR20DE (2WD) | $399.00 | |
||||||||||
| N14 Pulsar GTi-R SR20DET | $499.00 | |
||||||||||
| N15 Pulsar VZ-R SR16VE | $399.00 | |
||||||||||
Z32 300ZX VG30DETT * This Clutch is slightly smaller than factory and requires the flywheel to be re-dowelled. |
$699.00 | |
||||||||||
Z33 350Z/Fairlady VQ35DE |
$799.00 | |
||||||||||
Mitsubishi |
Lancer EVO 1/2/3 | $550.00 | |
|||||||||
| * also fits Galant VR4 4G63T | ||||||||||||
| Lancer EVO 4/5/6 | $799.00 | |
||||||||||
| Lancer EVO 7/8/9 | $995.00 | |
||||||||||
| GTO 1992 onwards, Twin Turbo | $850.00 | |
||||||||||
Subaru |
WRX 1994 onwards 5 Speed | $765.00 | |
|||||||||
| (Including STI) | ||||||||||||
| WRX 2001-2005 EJ20 6 Speed | $1299.00 | |
||||||||||
| (Including STI) | ||||||||||||
Mazda |
FC3S RX7 Series 4/5 13B | $825.00 | |
|||||||||
| FD3S RX7 Series 6 | $899.00 | |
||||||||||
| BG Familia GT-X 1.8 Turbo 4WD | $650.00 | |
||||||||||
| MX-5 NA306 1.6L (up to 1993) | $395.00 | |
||||||||||
| Mazda 6 2.3L (up to 2008) | $495.00 | |
||||||||||
Honda |
DC2 Integra B18C 1.8 V-TEC | $550.00 | |
|||||||||
| S2000 2.0 V-TEC | $1299.00 | |
||||||||||
Toyota |
MR2 Turbo SW20 3SGTE | $599.00 | |
|||||||||
Ford |
Falcon XF 4.1 | $299.00 | |
|||||||||
| Falcon EA 3.9 | $299.00 | |
||||||||||
| Falcon BA/BF XR6 Turbo | $1099.00 | |
||||||||||
| Falcon BA/BF XR8/FPV | $1899.00 | |
||||||||||
| * Kit includes solid flywheel | ||||||||||||
| Falcon EB-AU 5.0 V8 | $750.00 | |
||||||||||
Holden |
Commodore 3.8 V6 (VN/VP) | $375.00 | |
|||||||||
| Commodore 5.0 V8 (VN/VP) | $650.00 | |
||||||||||
5.0 V8 (VS/VT incl. HSV) 5 & 6 Speed Getrag Gearbox |
$749.00 | |
||||||||||
5.7 Gen III V8 6.0 Gen IV V8 (all, including HSV) |
$1599.00 | |
||||||||||
| * Kit includes solid flywheel | ||||||||||||
| Commodore 3.0 VL | $550.00 | |
||||||||||
 |
Exedy Sports Tuff Button Clutch Kits The Sports Tuff Heavy Duty Button clutch kits are manufactured to meet the demands of various forms of amateur drift, circuit, rally and drag racing. All HDB kits are supplied with high clamp load clutch cover assemblies and ceramic button clutch discs with sprung dampers. |
|||||||||||
Nissan |
S13 Silvia / 180SX CA18DET | $649.00 | |
|||||||||
| S13/S14 Silvia SR20DET | $699.00 | |
||||||||||
S15 Silvia SR20DET |
$799.00 | |
||||||||||
| * we can supply the S15 kit with a solid flywheel to replace the factory dual mass flywheel - enquire for details | ||||||||||||
| R32 Skyline RB20DET | $649.00 | |
||||||||||
| R33 Skyline RB25DET | $649.00 | |
||||||||||
| R32 GT-R (early push type) | $799.00 | |
||||||||||
| R32 GT-R (late pull type) | $995.00 | |
||||||||||
| RB30E | $599.00 | |
||||||||||
| P10/P11 Primera SR20DE (2WD) | $599.00 | |
||||||||||
| N14 Pulsar GTi-R SR20DET | $649.00 | |
||||||||||
| N15 Pulsar VZ-R SR16VE | $599.00 | |
||||||||||
| Z32 300ZX VG30DETT | $899.00 | |
||||||||||
Mitsubishi |
Lancer EVO 1/2/3 * also fits Galant VR4 4G63T |
$549.00 | |
|||||||||
| Lancer EVO 4/5/6 | $995.00 | |
||||||||||
| Lancer EVO 7/8/9 | $1299.00 | |
||||||||||
| GTO 1992 onwards, Twin Turbo | $1099.00 | |
||||||||||
Subaru |
WRX 1995-2000 5 Speed | $795.00 | |
|||||||||
| (Including STI) | ||||||||||||
| WRX 2001-2005 EJ20 6 Speed | $995.00 | |
||||||||||
| (Including STI) | ||||||||||||
Mazda |
FC3S RX7 Series 4/5 13B | $895.00 | |
|||||||||
| FD3S RX7 Series 6 13B | $995.00 | |
||||||||||
Honda |
DC2 Integra B18C 1.8 V-TEC | $649.00 | |
|||||||||
Toyota |
MR2 Turbo SW20 3SGTE | $699.00 | |
|||||||||
Ford |
Falcon XF 4.1 | $450.00 | |
|||||||||
| Falcon EA 3.9 | $450.00 | |
||||||||||
| Falcon BA/BF XR6 Turbo | $1099.00 | |
||||||||||
Falcon BA/BF XR8/FPV * Kit includes solid flywheel |
$1999.00 | |
||||||||||
| Falcon EB-AU 5.0 V8 | $950.00 | |
||||||||||
Holden |
Commodore 3.8 V6 (VN/VP) | $750.00 | |
|||||||||
| Commodore 5.0 V8 (VN/VP) | $750.00 | |
||||||||||
5.0 V8 (VS/VT incl. HSV) 5 & 6 Speed Getrag Gearbox |
$799.00 | |
||||||||||
5.7 Gen III V8 6.0 Gen IV V8 (all, including HSV) * Kit includes solid flywheel |
$1599.00 | |
||||||||||
| Commodore 3.0 VL | $599.00 | |
||||||||||
 |
Exedy Hyper Metal Single Plate Clutch KitsFrom high-powered drag racing to circuit and rally, the EXEDY Hyper Metal series demands high performance. The Hyper Single series includes the disc, cover and flywheel as a complete lightweight kit, allowing for better engagement and improved shift response Available for a range of Performance vehicles - enquire for details |
|||||||||||
| Back To Top | ||||||||||||
|
Exedy Hyper Metal Twin Plate Clutch KitsFrom high-powered drag racing to circuit and rally, the EXEDY Hyper Metal series demands high performance. The multi plate series is a pure racing clutch that still offers driveability for the street. The Hyper Single series includes the disc, cover and flywheel as a complete lightweight kit, allowing for better engagement and improved shift response Available for a range of Performance vehicles - enquire for details |
|||||||||||
Sports Seats |
||||||||||||
 |
Bride Cuga Seat (Replica)Adjustable and reclineable Sold individually but available in pairs |
|||||||||||
| $499.00 | |
|||||||||||
